I had heard of using concrete to refinish counter-tops, For $36, a 10-lb bag went a long way (one bag was enough for both the counter-top and tub tile).
used: Ardex Feather Finish Gray Self-Drying Cement. On top, I used 3 coats of a standard concrete sealer (check the instructions on the back and get one that cleans up with water and soap).
- Use a mask while mixing,
- Mix up a small amount at a time. It’ll dry out as you’re working, and it’s better to make multiple small batches per layer then try to add water to a dry batch and remix.
- You’ll end up applying in multiple layers. Get a trowel, it’s worthwhile.
- First layer works as scaffolding, giving the next layer something to hold onto. Get as much as you can on there, but don’t worry about full coverage.
- After it drys, sand down any rough/bumpy parts.
- Second layer gets you fuller coverage. Once it’s dry, give it another sanding. Repeat Repeat until it looks nice. I found that a final coat w/ a paintbrush left a nice finish.


